Keep up the good work!

Realized I haven't posted progress pics on AG forums, so here's the backlog:




Trimmed out the leg pieces and bonded most of them together using the same ABS sludge method from before, the knees are really tight so I'll do some quick trimming to make those easier to walk in.



Bottoms need to be trimmed to match.


picture of the seams that will smoothed over


Front of the thighs.



Thigh seams.

Coming along great can't wait to see you troop in it

Awesome, when do you plan on having it done?

I'm pushing as hard as I can to get it done by years end so I have time for other projects, but at this point I wouldn't be surprised if I didn't get it done till February cause I'm a procrastinator.

pfffft hurry up and come join the family of people that cant sit, barely walk or bend over, hates stairs...... haha

Besides the walking part I'm mostly there hahahaha

Got almost all of the pieces trimmed. I just need to size a few pieces up to make up for some pudge factor but shouldn't be too hard. Almost ready for assembly, the on to paint and the attaching everything.

Made some progress. Mostly test fitting....and forgot I didn't have compression suit.

So I have one picture of me struggling with the diaper.

Did some quick test fitting today, I realized today for those building phase II clones if they're a bit on the portly side I'd post pictures of my spacing to help them find a reference all of which I'll add the main post.



After that I glued the attachment tabs to the butt piece, at this juncture it's important to state that any pieces you intend to glue need to be flat, and raised edges that you missed in trimming will cause the pieces being glued to slip or not line up properly.

I probably spent about 5 minutes wondering why some pieces didn't fit together and all it took was a quick re-trim.



Here are some pictures of the tabs being glued in to the butt piece in prep to be attached to the cod piece.

Excellent, keep up the good work.

wow so kind of you to make this for me!!!!!! It's totally rad! lol. This is AWESOME!!!!!

To give a better idea of whats going on:

Again I'm 5'9" 205 lbs
on the diaper to ensure that it slid easily into position and that the ab piece fit into the top per the CRL I adjusted the spacing a bit and I'll back fill it once the holster mounts are in place.
For reference I gave it a 2 1/8" spacing from the cod to butt piece.

(Sorry the picture is upside down it was easier to set it up that way. for now)

haha possibly, we'll see how this one turns out

So made some progress, mostly just gluing things together.

Working on the ab piece here:


Again, cause I drink too much beer I had to widen the ab pieces.
This was done using a strip of ABS to use a tab to glue the two ends together in a way that would not only fit me, but also would fit into the modified diaper, as well as still allow the chest to attach in a reasonable way.

Here's the inside of the ab plate:

Normally one of those tabs would fold over the other and be glued in but I need about an extra inch so here's the image of the tab glued into place: